ProSealer

System Description

GPS ProSealTM System seals a variety of material and bag types including, EX poly/poly, PET Laminates, Press to close, Slide-Rite advanced closure systems and standard open mouth bags.

The ProSealTM is designed for portability allowing it to be located over an existing conveyor. It also incorporates height adjustment that enables the operator to set the elevation of the system to the surface of the conveyor. The panel mounted speed control allows the system to operate simultaneously with the conveyor. A pair of carrier belts guides the bag through the system holding it at the proper height for sealing as it passes between a set of heater bars.The hot seal then passes through a sealing wheel mounted on an adjustable pressure, linear motion air cylinder. The air pressure is adjusted through a regulator mounted below the control panel to the back of the system.

A set of infeed guide rails are utilized to properly locate the seal on the Slide-Rite advanced closure system to prevent damage while the sealing process is performed.

An optional Markum bag marking system can be located at the outlet of the system to mark the bags before they are discharged from the ProSealTM system.

Video

Additional Images